The successful completion of any construction project depends a lot on the quality of equipment used in the construction process. When it comes to equipment required for the construction procedure, scaffolding is a prominent one. Whether it is a small or large construction project, using a high-quality scaffolding is of utmost importance. The scaffolding manufacturer should ensure the best quality and long-term durability of the equipment. To get the most out of scaffolding, it should be stored properly, maintained and inspected regularly to ensure its load-supporting ability.

A checklist for scaffolding maintenance:

  • Scaffolding should be installed or erected as per the guidelines set by the manufacturer.
  • The handling of the equipment should be done carefully. It should be stored and transported with proper care.
  • The quality can be maintained by using the right storage systems. Ideally, it should be stored in a dry, damp-free and frost-free environment.
  • The inspection should be performed after regular intervals to determine whether there is any damage that requires repair.

 

Scaffolding Erection and Handling:

Different types of scaffolding are configured with different features to serve diverse purposes. As the configuration varies, the load-supporting capability differs as well. It is essential to erect the scaffolding system by qualified and trained professionals who know the installation and handling procedures of different types of scaffolding.

Proper Transportation and Storage:

The longevity of any type of scaffolding depends on the handling, storage and transportation procedure. If the equipment is stored without using the right stillage, the scaffold tube can get warped or bent. Without maintaining a proper storage system, you may find that the overall strength of the equipment is reduced, and the load-supporting capability is lowered. It should be stored in a dry atmosphere to avoid corrosion of metal.

Scaffold Repairing:

Repair and reconditioning are essential for the scaffolding equipment, even if it is well-maintained. Normal damage or deterioration occurs over time. Regular inspection should be undertaken, especially before and after every use of the scaffolding system. It should be performed to find out whether there is any damage and whether it requires any repairing service.

Checking Every Part:

Checking whether every part is in its place or not is another requirement for scaffolding maintenance. If any bolt or locking nut is lost or removed, the chances of accidents increases. By checking them, you can replace the damaged nut and use a new nut in place of the old one. Remember, you should only use the replacement parts approved by the manufacturer. The safety of the workers can be ensured by executing this maintenance tip.

The safety inspector can do the inspection within a few hours, based on the size and type of the scaffolding unit. However, by investing in proper maintenance and inspection, you can save a lot of time as the entire process runs smoothly.